FAQ: Which Whirlpool Dryer Heating Element To Buy?

Do all Whirlpool dryers use the same heating element?

Only electric dryers have heating elements. Whirlpool electric dryer heating elements are located in different locations on the machine depending on the model of dryer that you own. For a large amount of electric Whirlpool dryers have the heating element is located in the back of the dryer.

How much does a heating element cost for a Whirlpool dryer?

How Much Does a Heating Element Cost for a Dryer? A new heating element is usually between $40 and $100. This part might cost as low as $30 and as high as $200 or more, depending on the type of dryer.

Are dryer heating elements interchangeable?

No, they are not interchangeable. If you do a google image search for “dryer heating element” you can easily see they come in a wide variety of shapes and sizes. One brand might use the same element for different models, but different brands are almost never interchangeable.

You might be interested:  FAQ: How Do I Test Dishwasher Heating Element?

How can you tell if a dryer heating element is bad?

Inspect the metal wire coil for any breaks in the wire. If the wire is solid and has no breaks in it, the heating element should be good. If the wire has a break in it, the heating element is defective.

What causes a heating element to burn out in a dryer?

A dryer’s heating element operates on the same principle as the coil in an electric heater. It consists of an uninsulated metal conductor and when an electric current passes through it, its resistance to the flow of electricity makes it heat up. If the coil gets too hot, it burns out.

Is it worth replacing dryer heating element?

If your dryer’s heating element burns out more than once within a year or two, the thermal fuse, which is supposed to protect it, is probably defective, so it’s a good idea to replace it. The temperature in the heating chamber may also be too high, and that may be caused by poor venting.

What does it mean when your dryer blows out cold air?

One of the most common reasons your tumble dryer decides to blow out cold air instead of hot is, rather ironically, because it has overheated. If your tumble dryer does not have a reset button it is likely you will need to replace your thermostat and thermal overload cut-out (TOC).

How long should a dryer last?

The average clothes dryer lasts between eight and 12 years, according to Angie’s List. But the more you use that dryer, the shorter its lifespan is likely to be. Also, a higher-quality dryer is likely to outlast a cheaper model with inferior components.

You might be interested:  Quick Answer: Where To Buy Heating Element For Water Heater?

How long does a heating element last in a dryer?

The heating element can last between 8 and 18 years if the dryer is well-maintained and the vent and lint traps are clean. The heating element can burn out if the dryer is not kept well-maintained.

How can you tell if heating element is bad?

Touch the needle on the end of the tester to the other terminal. If the light inside the continuity tester glows, the heating element is good. If the tester fails to glow, the heating element needs replacing.

What is wrong with my Whirlpool dryer?

If there is a part malfunction when your dryer isn’t drying clothes a blown thermal fuse is often the cause. A dryer’s thermal fuse will trip to prevent the dryer from overheating, cutting power to the dryer. While a thermal fuse can malfunction over time, clogged dryer vents are a common trigger that blows the fuse.

Why is dryer not drying?

Check the Air Vent and Duct Clogged air vents are a common cause for poor airflow in clothes dryer systems. One way to see if your dryer’s air vent is clogged is by turning on your dryer and going outside to feel the flow of air leaving the vent. If it’s slow and not very warm, your vent may be due for a good cleaning.

Where is the thermal fuse on a dryer?

The thermal fuse will be located somewhere by the exhaust vent on your dryer. You will be able to visually identify it by the two wires connecting to it. Removing the front of the dryer and removing the drum might be easier to access the fuse’s location.

You might be interested:  Often asked: How To Fix The Heating Element In A Roper Dryer?

Where is the heating element located on a Whirlpool dryer?

Whirlpool usually locates the heating element on the back of dryer (must remove back of dryer) or under the drum (must remove front dryer). Be certain to disconnect power from dryer. Heating element coils look like stretched out door springs. A bad dryer heating element will have a break in the coil.

Leave a Reply

Your email address will not be published. Required fields are marked *