How To Replace Lennox Fireplace Blower And Heating Element?

Can you replace the heating element in an electric fireplace?

In many cases the heating element can’t be changed within an electric fireplace. However, the heating element may be able to be changed in certain models of electric fireplace. Consult the instruction manual for your particular model of electric fireplace to check whether you can replace the heating element.

Can you replace fireplace blower?

A professional fireplace service company charges about $400 to do the job (parts and labor). But you can replace the blower with a complete motor/fan blower assembly yourself in about an hour for less than $140. Many gas fireplaces use a blower to drive warm air out into the room.

Why won’t my electric fire heat up?

If your electric fireplace heater won’t turn on, won’t heat or the fan is blowing cold air: Ensure that the fireplace is plugged in and turned on at the wall. Ensure that the main power switch on the fireplace is turned on. With the power switch turned on for the fireplace, turn on any switches that control the heater.

You might be interested:  FAQ: How To Restring A Heating Element On A Electric Furnace?

Are there fuses in electric fireplaces?

Electric portable fireplaces have fuses in them that must be functional for the fireplace to heat properly. The fuses are inexpensive and easy to replace. To replace the fuse, first make sure that your fireplace is completely off so that you do not get shocked.

Can a heating element be repaired?

Heating elements are relatively simple. Heating elements can break and burn out, sag, and become misshapen. Most elements cannot be repaired, but they usually can be replaced. If you can’t remove the heating element to replace it, you’ll probably need to replace the entire appliance.

Why is my fireplace fan not working?

The blower motor supplements the heat produced by the gas burners by pushing air with a fan. If the blower motor is not working properly, try troubleshooting the equipment to check for common problems. A loose wire or similar minor issue can often be fixed in a few minutes without calling a repair technician.

How do you clean the inside of an electric fireplace?

Dust the Interior Dust may accumulate inside your electric fireplace, like any other unit in your home. To remove any dust, simply use a clean, dry cloth to wipe down the interior. Gently dust any media such as logs or glass inside your electric fireplace as well.

Where is the blower located in a fireplace?

A fireplace blower is a fan mounted on the exterior of the fireplace or inside the unit but outside the firebox itself.

Why is my electric fire blowing cold air?

An electric heater that blows cold air could be caused by one or more of the following reasons: The manual reset has tripped. The fan switch is “on” and the thermostat setting is below the actual temperature. The fan is dispersing this air after shutdown.

You might be interested:  Question: What Is Ohm Heating Element?

How do you reset an electric fireplace heater?

SOLUTION: Turn all switches to the “off” position and unplug the unit from the wall for five minutes. After five minutes, power everything back on.

How do I reset my electric fireplace remote?

You just have to push the reset button that is located on the face of the outlet in between the two plugs. If your electric fireplace is plugged into an outlet that is controlled by a wall switch, make sure the wall switch is flipped to the ON position.

Leave a Reply

Your email address will not be published. Required fields are marked *