Often asked: How To Replace Whirlpool Duet Heating Element?

Where is the heating element located on a Whirlpool Duet dryer?

Whirlpool usually locates the heating element on the back of dryer (must remove back of dryer) or under the drum (must remove front dryer). Be certain to disconnect power from dryer. Heating element coils look like stretched out door springs.

How do you remove the heating coil on a Whirlpool Duet dryer?

Unplug the power cord from the electrical outlet. Remove the screws holding the rear access panel in place. Remove the single screw at the top of the element assembly holding the heating element assembly in place. Pull the heating element assembly out of the dryer through the access panel.

How do you troubleshoot a Whirlpool Duet dryer?

How to Troubleshoot a Whirlpool Duet Electric Dryer

  1. Inspect household fuses or breakers.
  2. Close the dryer door firmly.
  3. Press and hold the “Start” button for five seconds.
  4. Check the display on the dryer for error codes.

Why is my dryer not getting hot?

Common reasons for an electric or gas dryer not heating are a tripped circuit breaker, clogged vent, and no gas flow. Other potential reasons include a faulty thermal fuse and broken heating element. If you gather your tools and follow this guide, you may be able to solve basic dryer heating problems on your own.

You might be interested:  FAQ: How Do I Test An Electric Dryer Heating Element?

What is the purpose of heating element?

What is a heating element? A heating element converts electrical energy into heat through the process of resistive (otherwise known as Joule heating). The electric current passing through the element encounters resistance, which produces heat.

What would cause a whirlpool dryer not to heat?

When gas or electric Whirlpool Dryer is not heating up, it usually caused by: Burnt Heating Element or Gas Valve Solenoid, Burnt Thermal Cut-Off Fuse, Defective Cycling Thermostat Or Gas Ignitor, Malfunctioned Flame Sensor.

How much does a dryer heating element cost?

How Much Does a Heating Element Cost for a Dryer? A new heating element is usually between $40 and $100. This part might cost as low as $30 and as high as $200 or more, depending on the type of dryer.

Is it worth replacing a heating element in a dryer?

If your dryer’s heating element burns out more than once within a year or two, the thermal fuse, which is supposed to protect it, is probably defective, so it’s a good idea to replace it. The temperature in the heating chamber may also be too high, and that may be caused by poor venting.

How do I fix my Whirlpool Duet dryer that won’t heat?

The most common causes for a Whirlpool Duet dryer not heating are: Lint build up inside the machine or dryer venting – to prevent lint build up be sure to clean the lint out of your dryer at least once every two years and clean out your venting at least once a year.

Leave a Reply

Your email address will not be published. Required fields are marked *