Quick Answer: Where To Purchase A Heating Element For A State Water Heater?

How much does a heating element cost for a hot water heater?

Heater Element Replacement Cost The typical professional charge to repair your heating elements is $200 to $300. There are two of these in each unit, one at the top and one at the bottom. The top element controls the bottom element and, if it goes bad, your unit won’t be able to generate hot water.

Are state water heaters the same as AO Smith?

State is one of the brands that was purchased by AO Smith and is a popular choice for many plumbing contractors. The State water heater almost identical to the AO Smith but there were more installed in the Kansas City area in the past 10 years.

How do I choose a water heater element?

How do I determine which type of water heater element I need?

  1. Examine your existing element.
  2. You will need to find out the voltage and the wattage.
  3. Compare and match your results of volts and watts to the volts and watts columns below.
  4. Choose the volts that match your voltage 120 or 240.
You might be interested:  FAQ: How To Check If Heating Element Is Working?

Are hot water heating elements Universal?

There are three types: screw in, bolt in and clamp in. They all have different wattage ratings and can work on either 120 or 240 voltage. Check your state and local codes before starting any project.

How do I know if my hot water heater element is bad?

Touch a probe on the multitester to each screw on the element. If you get no reading, or a maximum reading, the element is bad. Elements do have some resistance, so a reading of 10-16 ohms is normal, with higher ohm readings for 3,500 watt elements and lower readings for 5,500 watt elements.

How long should a hot water heater element last?

Replacing a Hot Water Heater Element Water heaters typically have a life span of 6 to 10 years, so if your heater is older, you can expect that it’ll be experiencing problems sooner than later.

Is AO Smith the same as Bradford White?

Both Bradford White and AO Smith are two well known and efficient manufacturers of water heaters. One may easily get confused while choosing water heaters from one of these brands. So, the overall points of both brands are the same.

What brand of water heater is the most reliable?

15 Best & Most Reliable Water Heater Brands in the World

  • A.O. Smith.
  • Rheem. Rheem was founded in 1925 by two brothers, Donald and Richard Rheem – and with financial backing from a third brother, William.
  • Kenmore.
  • Bradford White.
  • American Standard.
  • American Water Heaters.
  • Bosch.
  • EcoSmart.

Is Rheem better than AO Smith?

Both AO Smith and Rheem are great names in the water heater industry. Rheem has a better overall product offering with a higher reach in the industry. But AO Smith is known to have a better customer experience. Regardless of what type of water heater you choose, both options will provide you with excellent longevity.

You might be interested:  Often asked: How To Replace A Rheem 4500 Watt Heating Element?

Can you use any element in a water heater?

The Flat and the Universal Flange elements’ are fastened to the tank using four 3/8 inches bolts. The Round Head water heater element is bolted to the tank using a separate four-bolt flange. Today, all residential water heaters and manufacturers only use Screw-in style water heater elements’.

Does water heater element length matter?

Does the length of a water heater heating element make a difference? No, not as long as you have the proper voltage, watts and style. Shorter elements have a larger diameter therefore the same surface area.

Can I replace a 3500 Watt water heater with a 4500 Watt?

It is ok to install higher watt up to 5500 on 4500 watt heater if breaker is 30 amp and wire is 10 gauge. It is ok to install lower watt: replace 4500 with 3500 as long as voltage is same.

What causes a heating element to burn out in a water heater?

What Causes a Heating Element to Burn Out? Only electric water heaters rely on heating elements to warm up the water in the tank. Heavy gauge wires provide electricity to the components of your unit, so a poor connection between the wires and the water heater could result in the element giving out.

Can I replace a 4500 Watt water heater with a 5500 Watt?

Can I replace 4500 watt elements with 5500 watt? You can definitely replace 4500 watt with 5500 watt and get 4-7 gallons more hot water from a tank.

Leave a Reply

Your email address will not be published. Required fields are marked *