Readers ask: How To Replace A Whirlpool Heating Element?

Where is the heating element on a Whirlpool dryer?

Whirlpool usually locates the heating element on the back of dryer (must remove back of dryer) or under the drum (must remove front dryer). Be certain to disconnect power from dryer. Heating element coils look like stretched out door springs. A bad dryer heating element will have a break in the coil.

Why is the dryer not heating up?

Common reasons for an electric or gas dryer not heating are a tripped circuit breaker, clogged vent, and no gas flow. Other potential reasons include a faulty thermal fuse and broken heating element. If you gather your tools and follow this guide, you may be able to solve basic dryer heating problems on your own.

What is the purpose of heating element?

What is a heating element? A heating element converts electrical energy into heat through the process of resistive (otherwise known as Joule heating). The electric current passing through the element encounters resistance, which produces heat.

How can you tell if a heating element is bad?

Touch a probe on the multitester to each screw on the element. If you get no reading, or a maximum reading, the element is bad. Elements do have some resistance, so a reading of 10-16 ohms is normal, with higher ohm readings for 3,500 watt elements and lower readings for 5,500 watt elements.

You might be interested:  Often asked: State Scout Electric Water Heater Model Number 0591849-00 How To Fix The Heating Element?

Is it worth replacing a heating element in a dryer?

If your dryer’s heating element burns out more than once within a year or two, the thermal fuse, which is supposed to protect it, is probably defective, so it’s a good idea to replace it. The temperature in the heating chamber may also be too high, and that may be caused by poor venting.

How many times can you replace a heating element in a dryer?

Bottom Line If the dryer is well-maintained and the vents and lint traps are kept clean, the heating element can last between 8 and 18 years. If the dryer is used on a daily basis and is not kept well-maintained, the heating element can burn out at any time.

How do you troubleshoot a Whirlpool Duet dryer?

How to Troubleshoot a Whirlpool Duet Electric Dryer

  1. Inspect household fuses or breakers.
  2. Close the dryer door firmly.
  3. Press and hold the “Start” button for five seconds.
  4. Check the display on the dryer for error codes.

How much does a heating element for a Whirlpool dryer cost?

How Much Does a Heating Element Cost for a Dryer? A new heating element is usually between $40 and $100. This part might cost as low as $30 and as high as $200 or more, depending on the type of dryer.

How do I fix my Whirlpool Duet dryer that won’t heat?

The most common causes for a Whirlpool Duet dryer not heating are: Lint build up inside the machine or dryer venting – to prevent lint build up be sure to clean the lint out of your dryer at least once every two years and clean out your venting at least once a year.

You might be interested:  Quick Answer: How Much Does It Cost To Replace The Heating Element In A Clothes Dryer?

What happens when the heating element goes out in a dryer?

If the heating element isn’t working properly, the dryer will still spin and the cycle will complete, but it won’t get hot enough to help dry the clothes. Heating elements can naturally wear out over time, but overloading the dryer, not cleaning the lint screen and poor ventilation can all speed up that process.

Leave a Reply

Your email address will not be published. Required fields are marked *